Product Features

  • electrical shut-off device, can be combined with flushing system
  • low pressure loss
  • wetted metal parts made of stainless steel and gunmetal
  • spring return actuator with electroless reset for controls with switched output
  • 90° rotatable
  • water hammer free operation
  • easy maintenance while installed
  • maintenance free gear
  • for integration in existing KHS mini control system
  • self-centering shaft adapter with flange for assembly on the valve
  • male union thread
  • removable inner top part TOP-ENTRY, with EPDM gasket body and stainless steel ball
  • free from dead spots

Standards and Approvals

  • DVGW approval
  • WRAS approved under the scope of figure 684
  • according to DVGW worksheet W 570
  • according to accepted materials list from German environmental agency
  • soundproofing certification according to DIN EN ISO 3822 Class 1
  • DIN EN 13828
  • ÜA-Reg.-Nr. R-15.2.3-21-17048, WIEN-ZERT

Technical data

  • pressure rating PN 16
  • max. operating temperature 75°C
  • max. ambient temperature 55°C
  • protection class IP54
  • power supply 230V AC
  • elapsed time for actuated changeover 90 s
  • elapsed time for spring driven changeover 15 s
  • length of connection cable 1.2 m
  • wire cross section 2 x 0.75 mm²
  • power input during actuation 4,5W / 7 VA
  • power input during standstill 3,5W

Part no. DN A1 D1
(mm)		 H1
(mm)		 H2
(mm)		 L1
(mm)		 L2
(mm)		 SW1
(mm)		 T1
(mm)		 kg
6860501500 15 G 3/4 18 110 25 73 150.3 10 81 2.18
6860502000 20 G 1 22.5 110 25 73 150.3 10 81 1.58
6860502500 25 G 1 1/4 29 112.5 28 88 150.3 10 81 2.51
6860503200 32 G 1 1/2 35 115.5 31 93 150.3 10 81 2.35

fot_pro_per_68605_sall_ainfs_v1
zei_pro_sch_68605_sall_ainfs_v1
넳 넲
figure 686 05

1. electrical shut-off device, can be combined with flushing system
2. low pressure loss
3. wetted metal parts made of stainless steel and gunmetal

KHS quarter turn stop valve PLUS, 230V spring return actuator