ꁆ ꁇ

KHS quarter turn stop valve, with 24V actuator

figure 686 00

1. electrical shut-off device, can be combined with flushing system
2. low pressure loss
3. wetted metal parts made of stainless steel and gunmetal

Product Features

  • electrical shut-off device, can be combined with flushing system
  • low pressure loss
  • wetted metal parts made of stainless steel and gunmetal
  • two postition step actuator with status feedback
  • 90° rotatable
  • water hammer free operation
  • easy maintenance while installed
  • maintenance free gear
  • for connection to KHS Logic Control System or BMS
  • self-centering shaft adapter with flange for assembly on the valve
  • male union thread
  • removable inner top part TOP-ENTRY, with EPDM gasket body and stainless steel ball
  • free from dead spots

Standards and Approvals

  • WRAS approval
  • according to DVGW worksheet W 570
  • according to accepted materials list from German environmental agency
  • soundproofing certification according to DIN EN ISO 3822 Class 1
  • DIN EN 13828
  • ÜA-Reg.-Nr. R-15.2.3-21-17048, WIEN-ZERT

Technical data

  • pressure rating PN 16
  • max. operating temperature 75°C
  • max. ambient temperature 55°C
  • protection class IP54
  • power supply 24V AC/DC
  • position feedback 0…10V
  • elapsed time for actuated changeover 35 s
  • length of connection cable 1.2 m
  • wire cross section 5 x 0.5 mm²
  • power input during actuation 2,8W / 5,3 VA
  • power input during standstill 1,6W / 3,2 VA

Part no. DN A1 D1
(mm)		 H1
(mm)		 H2
(mm)		 L1
(mm)		 L2
(mm)		 SW1
(mm)		 T1
(mm)		 kg
6860001500 15 G 3/4 18 110 25 73 89 4 72 1.42
6860002000 20 G 1 22.5 110 25 73 89 4 72 1.45
6860002500 25 G 1 1/4 29 112.5 28 88 89 4 72 1.57
6860003200 32 G 1 1/2 35 115.5 31 93 89 4 72 1.74