Categories

figure 689 04 019

• wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant to aggressive water, stainless steel and drinking water-approved plastics

• pressure independent limitation of flow

• free from dead spots

• plastic parts with KTW and W 270 certification

• operating pressure PN 10

• 5l/min,10l/min,15l/min

• a flow limiter 10l/min is pre-assembled

• all functional components can be maintained without tools

• according to UBA (Federal Environmental Agency) valuation basis

Aerator set for KHS Hygiene Flush Box PRO, PURE and LITE

figure 689 07 001

• for covering KHS HS2®hygienic flushing box when surface mounted

• DC 01 fine sheet steel, powder-coated RAL 7035

• Incl. fixing material

cover for KHS HS2® hygiene flushing box

figure 689 4G 001

• for optional flow measurement in the KHS HS2® hygiene-flushing box

• wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water

• for installation in KHS HS2®hygiene-flushing box

• free from dead spots

CONTROL-PLUS flow measurement valve for KHS HS2® hygiene flushing box

figure 689 06 001

• for connecting KHS HS2®hygienic flushing box to the KHS Mini Control System

• for wall fastening

• 5 m connection cable

connection set surface-mounted CAN bus for KHS HS2® hygiene flushing box

figure 689 06 002

• for connecting KHS HS2®hygienic flushing box to the KHS Mini Control System

• for flush-mounted installation

• 5 m connection cable

connection set flush-mounted CAN bus for KHS HS2® hygiene flushing box

figure 689 05 001

• for connecting KHS HS2

• 5 m connection cable

BMS connecting cable via digital I /O for KHS HS2® hygiene flushing box

®hygienic flushing box to the KHS LOGIC control system or to the building management system (BMS) via digital I /O

figure 689 99 001

• pressure independent limitation of flow

• plastic parts with KTW and W 270 certification

• operating pressure PN 10

• 4 l/min, 10 l/min, 15 l/min

service set (4, 10, 15 l/min) for KHS HS2® hygiene flushing box

figure 619 01 001

• for connecting the KHS CoolFlow chiller, figure 618 01 and of the KHS Cool Flow cooler, figure 610 01

• for shut off for maintenance and repair

• selected components suitable for both KHS CoolFlow chiller 4.7kW (1.6-5.6) and 7.6kW (2.0-10.0)

• consisting of: two pipework compensators G 1, one safety valve Rp 1/2 x Rp 3/4, 6 bar, one double nipple R 1/2, two reducing T-pieces Rp 1 x Rp 1/2, two shut-off valves Rp 1, two shut-off valves Rp 1 with drain plugs on both sides, five extensions for pressure gauges and drain valves G 1/4, three pressure gauges with vertical connection G 1/4, two drain valves G 1/4 x G 3/4, one strainer Rp 1, two double nipples R 1, one diaphragm expansion vessel 12 litres, R 1/2, one screw connection R 1/2 x Rp 1/2, one manual regulating valve Rp 1, four ball valves with extended T-handle

• wetted parts made of gunmetal and drinking-water-approved plastics

• according to UBA (Federal Environmental Agency) valuation basis

Connection-set

figure 619 02 000

• vibration damper set for the KHS CoolFlow chiller for body and vibration isolation

• consisting of 4 square mounting bases with die-cast-aluminium device fastening with rubber vibration element in

• incl. screws and washers

• dimensions (H/W/D) mm 48/65/65

Vibration damper set for chiller

figure 686 01 001

• for the operation of the KHS full flow stop valve with spring-reset servo drive 24V DC with 24V AC supply voltage figur 686 01

• for installation next to the actuated valve

AC/DC converter

figure 686 02 023

• interface device for the KHS MASTER 2.0/2.1 mini control system for connection to the building management system

• protocol translation into in BACnet IP/MSTP

• for flushing systems with up to 24 slaves

• LAN RJ45 10/100 MBit/s Ethernet

• installation on DIN TS35 top-hat rail in accordance with EN60715

KHS BACnet Gateway L for MASTER 2.0/2.1

figure 686 02 024

• interface device for the KHS MASTER 2.0/2.1 mini control system for connection to the building management system

• protocol translation into in BACnet IP/MSTP

• for flushing systems with up to 62 slaves

• LAN RJ45 10/100 MBit/s Ethernet

• installation on DIN TS35 top-hat rail in accordance with EN60715

KHS BACnet Gateway XL for MASTER 2.0/2.1

figure 99 3590

• licence code for activating the Modbus TCP/IP protocol on the KHS MASTER 2.0/2.1 mini control system

• enables connection to the building management system via Modbus TCP/IP

• license code can be obtained with MASTER 2.0/2.1 serial number by calling 49 (0) 2761 891-556 or e-mail to Lizenz@kemper-group.com

Modbus TCP/IP licence for MASTER 2.0/2.1

figure 611 00

• data logger and gateway for the KHS CoolFlow cooler for connection to the building management system

• saves all analysable parameters and serves as interface device for the BMS/BA via Modbus TCP/IP

• plug-and-play thanks to prepared installation space and connection cable for power and data connection in the KHS CoolFlow cooler

• data storage on micro SD card, supplied

• readable and writeable data points provided via Ethernet using Modbus TCP/IP protocol

• serves as upgrade device for the KHS CoolFlow cooler

• lifetime storage capacity through large 4GB SD card

• LAN RJ45 10/100 MBit/s Ethernet

• micro SD card slot

• LED status display

Data logger and gateway for KHS Cold Water Cooler

figure 617 0G

• control range 15°C - 22°C

• as an automatic circulation balancing valve

• thermostatic balancing valve for cold water return branches with kv-min ≥ 0.03

• for thermostatic, hydraulic balancing

• thermostatic balancing unit

• wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water

KHS CoolFlow cold water balancing valve, without actuator and flushing function

figure 689 04 026

• Reversible cover against unauthorised access incl. fastening parts

• for installation in all installation situations (flush or surface mounted)

• for installation in dry- or prewall installation systems

Reversible cover against unauthorised access for KHS Hygiene Flush Box PRO/PURE/LITE