Categories
ETA-THERM thermostatic balancing valve
figure 130 0G
• control range 56°C - 58°C
• thermostatic balancing valve for hydraulic balancing of very short circulation circuits from kv-min ≥ 0.05
• for hydraulic balancing of hot water return systems (PWH-C), supports thermal disinfection
• male union thread
ETA-THERM thermostatic balancing valve, union thread, 56°C - 58°C
figure 131 00
• control range 56°C - 58°C
• thermostatic balancing valve for hydraulic balancing of very short circulation circuits from kv-min ≥ 0.05
• for hydraulic balancing of hot water return systems (PWH-C), supports thermal disinfection
• female pipe thread
ETA-THERM thermostatic balancing valve, FPT, 56°C - 58°C
figure 540 02
• control range 56°C - 58°C
• thermostatic balancing valve for hydraulic balancing of very short circulation circuits from kv-min ≥ 0.05
• for hydraulic balancing of hot water return systems (PWH-C), supports thermal disinfection
• female pipe thread
UP-ETA-THERM thermostatic balancing valve, for flush-mounted installation, FPT, 56°C - 58°C
figure 542 02
• control range 56°C - 58°C
• thermostatic balancing valve for hydraulic balancing of very short circulation circuits from kv-min ≥ 0.05
• for hydraulic balancing of hot water return systems (PWH-C), supports thermal disinfection
• press connection for Geberit MAPRESS pipe
UP-ETA-THERM thermostatic balancing valve, for flush-mounted installation, 56°C - 58°C, MAPRESS
figure 544 02
• control range 56°C - 58°C
• thermostatic balancing valve for hydraulic balancing of very short circulation circuits from kv-min ≥ 0.05
• for hydraulic balancing of hot water return systems (PWH-C), supports thermal disinfection
• press connection for Viega SANPRESS SST pipe and PROFIPRESS copper pipe
UP-ETA-THERM thermostatic balancing valve, for flush-mounted installation, 56°C - 58°C, San/Profipress
figure 134 0G
• control range 62°C - 64°C
• thermostatic balancing valve for hydraulic balancing of very short circulation circuits from kv-min ≥ 0.05
• for hydraulic balancing of hot water return systems (PWH-C), supports thermal disinfection
• male union thread
ETA-THERM thermostatic balancing valve, union thread, 62°C - 64°C
figure 136 00
• control range 62°C - 64°C
• thermostatic balancing valve for hydraulic balancing of very short circulation circuits from kv-min ≥ 0.05
• for hydraulic balancing of hot water return systems (PWH-C), supports thermal disinfection
• female pipe thread
ETA-THERM thermostatic balancing valve, FPT, 62°C - 64°C
figure 540 62
• control range 62°C - 64°C
• thermostatic balancing valve for hydraulic balancing of very short circulation circuits from kv-min ≥ 0.05
• for hydraulic balancing of hot water return systems (PWH-C), supports thermal disinfection
• female pipe thread
UP-ETA-THERM thermostatic balancing valve, for flush-mounted installation, 62°C - 64 °C, FPT
- Stop Valves ꁕ
- Safety Valves ꁕ
- Pressure Reducing Valves and Filter
- Balancing valves ꁕ
- Measuring Products
- Hygiene System KHS ꁕ
- Thermal separators
- Flush-mounted valves
- Stop valves water meter combinations ꁕ
- Frost-proof outdoor taps
- TRESOR Cabinets ꁕ
- Sampling Valves
- ThermoSystem KTS ꁕ
- Other Valves
- Accessories ꁕ
-
Spare parts
ꁕ
- Spare parts for stop valves
- Spare parts for protection and safety valves
- Spare parts for pressure reducing valves and filters
- Spare parts for balancing valves
- Spare parts for measuring products
- Spare parts for sampling valves
- Spare parts for flush-mounted valves
- Spare parts for stop valve water meter models
- Spare parts for frost-proof outdoor taps
- Spare parts for TRESOR cabinets
- Spare parts for hygiene system KHS
- Spare parts for dirt traps
- Handwheels and gaskets
Hydraulic balancing to the bathroom
If it is necessary to draw off hot water immediately after opening a tap, whether because of increased hygiene requirements or for reasons of comfort, an automatic balancing valve is required to hydraulically balance the bathroom circulation system. As very low volume flows are required to maintain the temperature in a bathroom on account of reduced heat-dissipating surfaces, we have developed the ETA-THERM specifically for this case, whose kv value (kvmin = 0.05, kVmax = 0.4) is specially tailored to meet the needs of the bathrooms.
ETA-THERM is available in two versions
Installation is possible in the area of the individual shutoff in bathrooms as a flush-mounted or surface-mounted balancing valve.
ETA-THERM thermostatic balancing valve
About Us
Solutions
